Drawing Up The Lower Thread

The lower thread should be pulled up by lowering the needle before starting sewing.

Lightly hold the end of the upper thread and then slowly turn the handwheel towards your direction (counterclockwise) by hand to lower and then raise the needle.

Pull on the upper thread to draw up the lower thread.

Finally pull out about 4 inches or about 10 cm of both the upper and lower threads and put them toward the back of the machine under the presser foot.

(For some models with a quick-set bobbin, lightly hold down the bobbin with the help of the right hand, and then guide the thread through the two slits, pull the thread toward you and then cut it with the thread cutter at the end of the slit. Start sewing after threading the lower and upper thread).